MIL-P-19380/1
28 March 1981
SUPERSEDING IN PART
MIL-P-19380H
5 April 1972
With Amendment-1
15 November 1972
MILITARY SPECIFICATION
PONTOONS, STEEL, SECTIONAL, P-SERIES,
DETAIL SPECIFICATION FOR
This specification is approved for use by all Departments
and Agencies of the Department of Defense.
The complete requirements for procurement of the P-series sectional
steel pontoons described herein shall consist of this document and the
latest issue of Military Specification MIL-P-19380J.
1.
SCOPE
1.1 Scope. This specification describes detail requirements for steel
pontoon units, either assembled or knocked-down.
1.2 Classification.
Pontoon units shall be of the Mark numbers specified
(see 6.2 and Table I).
2.
APPLICABLE DOCUMENTS -
2.1 Issues of documents. The following documents, of the issue in effect
on date of invitation for bids or request for proposal, form a part of this
specification to the extent specified herein.
REQUIREMENTS
3.
3.1 General specification. The individual item requirements shall be as
specified herein and in accordance with MIL-P-19380J. In the event of any
conflict between requirements of this specification and the general
specification, the detail specification shall govern.
3.2 First article.
(See 3.2 of MIL-P-19380J.)
3.3 Drawings.
(See 3.3 of MIL-P-19380J.)
3.4 Materials.
(See 3.4 of MIL-P-19380J.)
3.4.1 Structural steel.
(See 3.4.1 of MIL-P-19380J.)