MIL-P-29191B(YDI)
The outboard motors, workboat platform, and other components
5.2.2 Level B.
shall be packed as specified for level A, except boxes conforming to PPP-B-601
shall be domestic type.
Each complete workboat platform shall be packed to insure
5 2.3 Commercial.
arrival at destination in a satisfactory condition and ensure carrier acceptance
and delivery at lowest rating from the supplier to the initial destination.
In addition to any special marking required in the contract,
5 3 Marking
marking shall be in accordance with MIL-STD-129.
NOTES
6
(This section contains information of a general or explanatory nature that
may be helpful, but is not mandatory.)
The workboat platform described in this specification is
6.1 Intended use.
intended for use in deploying and handling oil containment booms in harbors and
inland waterways
Acquisition documents should specify the
6.2 Acquisition
requirements
following
Title, number, and date of this specification.
Issue of DODISS to be cited in the solicitation, and if required, the
specific issue of individual documents referenced (see 2.1.1 and 2.2).
When crafts over 12 feet wide shall be of modular design and construction
(see 3.1).
When a first article sample is required for inspection and approval (see
3.2, 4.3, and 6.4).
When technical data is required (see 3.2.1, 3.14, and 4.6.1).
Additional controls required, other than minimum (see 3.4.4).
Size of fuel tanks (18 or 27 gallon (see 3.8).
When treatment for fungus resistance is required (see 3.11).
When color of finish coat is other than specified (see 3.12).
Level of preservation, and level of packing required (see 5.1 and 5.2).
The following data requirements
6.3 Consideration of data requirements.
The
should be considered when this specification is applied on a contract.
applicable Data Item Descriptions (DIDs) should be reviewed in conjunction with
the specific acquisition to ensure that only essential data are requested/
provided and that the DIDs are tailored to reflect the requirements of the
To ensure correct contractual application of the data
specific acquisition.
requirements, a Contract Data Requirements List (DD Form 1423) must be prepared
to obtain the data, except where DOD FAR Supplement 227.405-70 exempts the
requirement for d DD Form 1423.
suggested tailoring,
DID title
Reference paragraph
DID number
DI-T-5204
Test Plan.
3.2.1, 4.6.1 & 3.14
Drawings,
DI-E-7031
3.14
Engineering and
Associated Lists.
126p16" style="font-size:12px">1 `)
Downloaded: 2014-09-30T19:59Z
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business